Corrosion behaviour of Mg-Gd-Y-Zn-Ag alloy components with different sizes after cooling

The corrosion behaviour of Mg-6Gd-3Y-1Zn-0.3Ag (wt.%) alloy components with different sizes after cooling was investigated. The alloys in the small components (SC) cooled fast, which were composed of α-Mg matrix and coarse long-period stacking ordered (LPSO) phases. The alloys in the large components (LC) cooled slowly, and there were thin lamellar LPSO phases precipitating inside the grains, except for α-Mg matrix and coarse LPSO phases. The hydrogen evolution test revealed that the corrosion rate of LC sample was higher than that of SC sample. Electrochemical impedance spectroscopy (EIS) test showed that the surface film on LC alloys provided worse protection. The corrosion morphologies indicated that the precipitation of the thin lamellar LPSO phases in LC sample caused severe micro-galvanic corrosion, which accelerated the rupture of the surface film.     

Fabrication and properties of the superhydrophobic ceria-based composite coating on magnesium alloy

A superhydrophobic ceria-based composite coating is developed to improve anticorrosion properties of AZ61 magnesium alloy, fabricating via chemical conversion method followed by hydrothermal treatment. The cerium conversion coating has a block structure with microcracks. After the hydrothermal treatment, a dense CeO₂ layer, porous CeO₂ nanorods, and stearic absorbing layers are grown stepwise on the conversion coating. And the composite coating is hydrophobic or even superhydrophobic and has almost no microcracks. As the hydrothermal reaction time increases, the water contact angle of the composite coating first increases and then decreases, and it reaches the maximum value of 152° after hydrothermal treatment for 4 h. Both the dense CeO₂ layer and the superhydrophobic stearic absorbing layer can effectively prevent the electrolyte from contacting the substrate; the corrosion current density of the superhydrophobic composite coating is lower than that of the hydrophilic composite coating and the cerium conversion coating, and has the best corrosion resistance.     

A simulation study of protons heated by left/right-handed Alfvén waves generated by electromagnetic proton-proton instability

Most protons in the solar wind belong to one of two different populations,the less dense beam protons and the denser core protons.The beam protons,with a velocity of(1-2)VA(VA is the local Alfvén speed),always drift relative to the core protons;this kind of distribution is unstable and stimulates several kinds of wave mode.In this study,using a 2D hybrid simulation model,we find that the original right-handed elliptically polarized Alfvén waves become linearly polarized,and eventually become right-handed and circularly polarized.Given that linearly polarized waves are a superposition of left-handed and right-handed waves,cyclotron resonance in the right-handed/left-handed component heats beam/core protons perpendicularly.The resonance between beam protons and right-handed polarized waves is stronger when the beam relative density is lower,resulting in more dramatic perpendicular heating of beam protons,whereas the situation is reversed when the beam relative density is larger.     

深竖井大吨位提升机高比压高摩擦因数衬垫的研制

针对深竖井、大吨位的提升条件下,摩擦衬垫需要高比压和高摩擦因数的难题,在工况分析和参数设计的基础上,研制了比压为2.5 MPa、摩擦因数为0.28的摩擦衬垫,并分别对衬垫的稳定性、抗比压能力、硬度特性、压力特性和磨损情况进行试验.委托第三方检测验证,衬垫的比压试验值达到9.8 MPa,摩擦因数试验值达到0.381,满足实验室的指标要求.     

8K超高清复合测试图与测量方法研究

在介绍8K超高清显示系统技术现状的基础上,详细介绍8K超高清复合测试图的参数指标、关键要素及测试内容,研究8K超高清显示设备的关键光学指标的测量方法.     

稳定同位素技术在禽类及其制品溯源领域的研究进展

本文基于国内外禽类及其制品溯源的研究成果，针对市场上出现的禽类及其制品的产地和饲养方式造假（如普通鸡蛋冒充地理标志鸡蛋、自由散养鸡蛋、有机鸡蛋等）、禽类饲料成分掺假（如非法添加动物副产品、色素等）等问题，梳理了稳定同位素技术在禽类及其制品可追溯性的应用进展，在此基础上提出禽类及其制品溯源的现存问题和发展方向，以期为稳定同位素技术在禽类及其制品质量安全领域的深入研究及食品溯源体系完善提供参考。     

AT供电方式下高铁站台空间电场分布研究

为分析高速铁路站台接触网周围空间电场的影响,建立站台接触网与列车及建筑物的等效模型,通过模拟电荷法计算并分析AT供电方式站台区域工频电场的分布规律,运用MATLAB绘制出不同高度及有无建筑、有无列车等多种情况的电场强度变化曲线.分析得出垂直方向上距地面高度越高,场强越大;水平方向上以接触线为中心向远处衰减.列车对站台上场强屏蔽效果显著,在白色安全线处达到了86％;而建筑由于距离较远对电场屏蔽效果仅为6％,站台上电场强度的极大值出现在人体头部区域,无建筑无列车停靠时场强在头部已经接近5000V/m,所以旅客在无列车停靠时也尽可能站在白色安全线外候车.     

自重湿陷性黄土地基预钻孔浸水处理的可靠度设计方法

为解决传统预浸水法存在的浸水时间长、浸水处理范围难以确定等不足,基于土体中水分运移规律,依据可靠度理论、极限状态设计方法及复合 Poisson 过程原理,提出一种消除黄土湿陷性的处理浸水方法——预钻孔浸水法。给出了利用预钻孔浸水法对自重湿陷性黄土地基进行浸水时,水平向及竖直向浸水影响范围的确定模型;在此基础上结合达西定律给出了浸水孔设计参数如孔深、孔间距及浸水孔个数的确定方法。结合铜川某工程,设计进行了现场预钻孔浸水试验,对该方法的合理性进行了验证,并通过现场钻探、现场勘探、室内湿陷性试验等方法对该方法的处理效果进行了评价。该浸水方法具有浸水时间短、浸水影响范围可根据浸水孔布设进行控制等优点,且浸水处理效果良好,完全符合施工要求。